The LED Trailer Tail Lights # 328-003-81LM1 and # 328-003-81M1 are going to be our closest LED tail lights that we have to your current lights on your 2001 Jayco Quest. The light assembly is 8-11/16" long x 3-7/8" tall x 2" deep. And the mounting holes are 7-3/16" x 2-9/16".
The light assembly # 328-003-81LM1 includes mounting tabs for for the license plate and is 5-7/8" tall with the tabs for the plate. view full answer...
Your 2004 Jayco Qwest pop up uses a standard style of RV door latch which is what the Global Link RV Entry Door Latch Kit part # 295-000019 you referenced is designed to fit. view full answer...
The great thing about RV roof vents is they all basically are designed to fit the same roof vent size opening which measures 14 inch by 14 inch like the Camco RV Trailer Roof Vent part # CAM40480 that you referenced. If you are looking for just a basic roof vent without a fan that just opens to allow ventilation this would work well.
Or for the same size vent that has a 12 volt fan built into it you might like the Fan-Tastic Roof Vent part # FV801250. The fan can move 920 CFM so it will... view full answer...
It sounds like you are talking about moving your leaf springs down further on the hangers installed on the frame of your trailer.
If that is the case then as long as each end of the spring is moved down the exact same distance, you will get the much lift in your trailers ride height.
For example if you move the leaf springs and equalizers 1" lower on all of the hangers, you will get 1" lift.
If you need more lift than your current hangers can give you going with the Correct Track Alignment... view full answer...
If you're referring to an entire latch assembly then we do have some options for you but just keep in mind I don't know what you have currently to base any sort of recommendation off of. That said, the best way to find a replacement is to remove the old latch and measure the cutout. The Global Link RV Entry Door Locking Latch Kit part # 295-000019 for example fits a cutout 2-1/2" wide x 3-1/2" tall to 3" wide x 4" tall cutout. If this won't work feel free to provide me with your cutout... view full answer...
The 3k torsion axles like what you have on your 2002 Jayco Qwest trailer use the same hub/drums as 3,500 lb axle so for a replacement you'd want the # AKHD-545-35-EZ-K. Then for a set of self-adjusting brake assemblies you'd want the part # AKEBRK-35-SA. At this time we do not have any side windows. view full answer...
Your 2004 Jayco Qwest had axles that had too low a capacity to add brakes originally. The easiest conversion is to replace your current axle and suspension with the Timbren Axle-Less Trailer Suspension System w Electric Brake Hubs - Straight Spindle - 3,500 lbs # A35RS545E. This is a universal fit axle replacement that comes with the suspension, the EZ Lube axles and the brake assembly along with drums. I've attached an article to assist with parts to convert your current axle if you... view full answer...
A flip kit will be an excellent way to get your camper higher off the ground improving ground clearance which is especially useful when camping in some less developed areas.
To determine which flip kit you need we will have to know the axle diameter. The easiest way to do this is to measure anywhere along the axle tube you see when you look under the trailer. A Performance Tool # PTW80157 digital caliper makes simple work of this task. (It is totally useful for other jobs as well. You... view full answer...
A pretty standard rv screen door slider dimension is right at around 12 inches like the part # LC234101 which most likely would work for you, but the best way would be to measure the slot dimension you have so you can verify what would be the correct size to fit.
I attached a link to all of the sliders we offer if you need a different size. view full answer...
Go To Results